From inside (document excerpt):
45/49 Operator´s manual (EPA) Please read these instructions carefully and make sure you understand them before using the saw. 101 90 11-95 KEY TO SYMBOLS Symbols CAUTION! Chain saws can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance. Please read the instructions carefully and make sure you understand them before using the saw.
Chain Saw User Manual Free Download. Chainsaw Operator’s Manual. Chains for Chainsaws Free Instruction Manual Download PDF. Revision: 1995, 1996, 1997, 1998, 1999.
Always wear approved protective gloves. Always wear: · Approved protective helmet · Approved hearing protection · Protective glasses or visor Regular cleaning is required. Both of the operator´s hands must be used to operate the chain saw. Please see page 30 in your “Chain saw operator´s safety manual “. Visual check. Never operate a chain saw holding it with one hand only. Please see page 30 in your “Chain saw operator´s safety manual “. Protective glasses or a visor must be worn. Contact of the guide bar tip with any object should be avoided. Please see pages 12-21 in your “Chain saw operator´s safety manual “. Tip contact may cause the guide bar to move suddenly upward and backward, which may cause serious injury. Please see pages 12-21 in your “Chain saw operator´s safety manual “. 2 English CONTENTS Before using a new saw · Read the instructions carefully. · Check cutting equipment is correctly fitted and adjusted. See page 25. · Refuel and start the saw. Check the carburetor settings. See pages 26-29. · Do not use the saw until sufficient chain oil has reached the chain, see page 14. IMPORTANT! If the carburetor mixture is too lean it greatly increases the risk of engine failure. Poor maintenance of the air filter will cause carbon build-up on the spark plug and lead to difficult starting.
Wikipedia’s page for Husqvarna