Knowing your vehicle
IMMOBILIZER SYSTEM (IF EQUIPPED)
Your vehicle is equipped with an elec- To deactivate the immobilizer
Limp home (override) procedure
tronic engine immobilizer system to
reduce the risk of unauthorized vehicle
use.
Your immobilizer system is comprised of
a small transponder in the ignition key,
and antenna coil in the key cylinder and
Immobilizer Control Unit (or Smartra
Unit).
With this system, whenever you insert
your ignition key into the ignition switch
and turn it to ON, the antenna coil in the
ignition switch receives a signal from the
transponder in the ignition key and then
sends the signal to the ECU (Engine
Control Unit).
system:
When you turn the ignition key to the ON
position, if the IMMO indicator goes off
after blinking 5 times, your transponder
equipped in the ignition key is out of order.
You cannot start the engine without the
lime home procedure. To start the engine,
you have to input your password by using
the ignition switch.
Insert the ignition key into the key cylin-
der and turn it to the ON position.
To activate the immobilizer sys-
tem:
Turn the ignition key to the OFF position.
The immobilizer system activates auto-
matically. Without a valid ignition key for
your vehicle, the engine will not start.
The following procedure is how to input
your password of “2345” as an example.
1.
Turn the ignition key to the ON position.
The IMMO indicator ( ) will blink 5
✽
NOTICE
times and go off indicating the begin-
ning of the limp home procedure.
When starting the engine, do not use the
with other immobilizer keys
around. Otherwise the engine may not
start or may stop soon after it starts.
Keep each key separately not to have
any malfunction after you receive your
new vehicle.
2.
Turn the ignition key to the ACC posi-
tion.
key
The ECU checks the signal whether the
ignition key is valid.
3. To enter the first digit (in this example
“2”), turn the ignition key to the ON and
ACC position twice. Perform the same
procedure for the next digits between 3
seconds and 10 seconds (for example,
for “3”, turn the ignition ON and ACC 3
times).
If the key is determined to be valid, the
engine will start.
If the key is determined to be invalid, the
engine will not start.
3
7
| Categories | Kia Manuals, Kia Rio Manuals |
|---|---|
| Model Year | 2006 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)