2010 Kia Sedona Owners Manual

Maintenance
Waxing
Finish damage repair
Underbody maintenance
Wax  the   vehicle   when  water   will  no
longer bead on the paint.
Always wash  and dry the  vehicle before
waxing.  Use   a  good  quality   liquid  or
paste wax, and follow the manufacturer’s
instructions. Wax all metal trim to protect
it and to maintain its luster.
Removing  oil, tar,  and similar  materials
with a spot  remover will usually strip  the
wax  from the  finish.  Be sure  to  re-wax
these areas even if the rest of the vehicle
does not yet need waxing.
Deep  scratches  or  stone  chips   in  the
Corrosive  materials   used  for   ice  and
snow removal  and dust control may  col-
lect on the  underbody. If these materials
are not removed, accelerated rusting can
occur  on underbody  parts  such  as  the
fuel lines,  frame,  floor pan  and exhaust
system,  even   though  they  have   been
treated with rust protection.
Thoroughly flush  the  vehicle underbody
and  wheel  openings  with  lukewarm  or
cold  water once  a month  at  the end  of
each  winter.   Pay  special   attention   to
these areas  because it is difficult  to see
all the mud and dirt. It  will do more harm
than  good to  wet  down the  road  grime
without removing  it. The lower  edges of
doors,  rocker  panels, and  frame  mem-
bers have drain holes  that should not be
allowed to clog with dirt; trapped water in
these areas can cause rusting.
painted
surface
must
be
repaired
promptly. Exposed metal will quickly  rust
and  may   develop  into  a  major   repair
expense.
NOTICE
If your vehicle is  damaged and requires
any metal repair or replacement, be sure
the  body   shop   applies  anti-corrosion
materials   to    the   parts   repaired   or
replaced.
CAUTION
Bright-metal maintenance
Wiping  dust or  dirt  off the  body
with  a dry  cloth  will scratch  the
finish.
Do  not  use  steel  wool, abrasive
cleaners,   or  strong   detergents
To remove road  tar and insects, use  a
tar  remover,  not  a   scraper  or  other
sharp object.
To protect the  surfaces of bright-metal
parts from corrosion, apply a coating of
wax or chrome preservative and rub to
a high luster.
containing
highly    alkaline    or
caustic  agents on  chrome-plated
or anodized aluminum  parts. This
may result  in damage  to the pro-
tective coating  and cause  discol-
oration or paint deterioration.
WARNING
After washing  the  vehicle, test  the
brakes while driving slowly to see if
they have been affected  by water. If
braking  performance   is  impaired,
dry  the  brakes  by   applying  them
lightly while maintaining a slow for-
ward speed.
During  winter  weather   or  in  coastal
areas, cover the bright metal parts with
a heavier  coating of  wax or preserva-
tive. If  necessary,  coat the  parts  with
non-corrosive petroleum  jelly  or other
protective compound.
6
44
Product Specification
CategoriesKia Manuals, Kia Sedona Manuals
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 356 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(3 votes, average: 4.33 out of 5)
Automotive readers have rated 2010 Kia Sedona Owners Manual 4.3 out of 5.0 based on 3 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

2010 Kia Sedona Owners Manual SKU UPC Model
Dayton Simpkins on Jan 16, 2013.



Rudolfo Villela on Dec 30, 2012. 2010 Kia Sedona Manual

I downloaded the manual for my father, who just purchased a 2010 Sedona. Since the vehicle did not come with a manual, it's nice to know they're site like Need Manual on the internet to assist. The only issue I could see is on the actual manual itself. On page 3/37 the text feature on that page did not appear. The only thing that came up was the rose colored square which looks like a picture of the seats should have appeared. Other than that, I really do appreciate you guys for having the manual online!


senan on Nov 07, 2012. iraq

thank you