STIHL MS 360 Chainsaw Owners Manual

english
a)
saws with a displacement of less
than 3.8 cubic inches (62 cm³).
must, in their original condition,
meet a 45° computer derived
kickback angle when equipped with
certain cutting attachments.
and must be equipped with at least
two devices to reduce the risk of
kickback injury, such as a chain
brake, low kickback chain, reduced
kickback bar, etc.
angles that may occur in real life cutting
situations. Compliance with § 5.12 of
ANSI B 175.1-2000 does not automatic-
ally mean that in a real life kickback the
bar and chain will rotate at most 45°.
Devices for reducing the risk of
kickback injury
STIHL recommends the use of the
STIHL Quickstop chain brake on your
power-head with green labeled reduced
kickback bars and low kickback chains.
!
Warning!
!
In order for powerheads below 3.8 cubic
inch (62 cm³) displacement to comply
with the computed kickback angle
Warning!
To reduce the risk of injury, stop using
the saw immediately if the chain brake
does not function properly. Take the saw
to your local STIHL Service Center! Do
not use the saw until the problem has
been rectified (see the section "Chain
Brake").
requirements of § 5.12 of ANSI B 175.1-
2000
use only the following cutting
attachments:
b)
saws with a displacement of
bar and chain combinations listed
as complying in the "Specifications"
section of the Owner's Manual or
3.8
cubic inches (62 cm³) and above
must be equipped with at least one
device designed to reduce the risk
of kickback injury such as a chain
brake, low kickback chain, reduced
kickback bar, etc.
other replacement bar and chain
Quickstop chain brake
combinations marked in
accordance with the standard for
use on the powerhead or
STIHL has developed a chain stopping
system designed to reduce the risk of
injury in certain kickback situations. It is
called a Quickstop chain brake. The
Quickstop is available as standard
The computer derived angles for saws
replacement chain designated
below 3.8 cubic inch (62 cm³)
"low kickback saw chain''.
displacement are measured by applying
a computer program to test results from
a kickback test machine.
See the section on "Low kickback saw
chain and reduced kickback bars"
equipment on your STIHL chainsaw and
is available for installation on most older
STIHL saws. Ask your dealer to retrofit
your older model saw with a chain brake.
!
Warning!
The computer derived angles of § 5.12
of ANSI B 175.1-2000 may bear no
relationship to actual kickback bar
rotation
MS 360
15
Product Specification
CategoriesChainsaw Manuals, STIHL Chainsaw Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 126 pages
LanguageEnglish, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website