Important!
Warning!
Important!
5.
Start engine of the vehicle with
Never lean over batteries while
connecting or jump starting, you
might get injured.
A discharged battery can freeze at
approx. + 14°F (-10°C). In that case, it
must be thawed out before jumper
cables are used.
the charged battery and run at
high idle. Make sure the cables
are not on or near pulleys, fans,
or other parts that will move when
the engine is started. Then start
engine of the disabled vehicle in
the usual manner.
Battery fluid contains sulfuric acid.
Do not allow this fluid to come in
contact with eyes, skin or clothing. In
case it does, immediately flush
affected area with water, and seek
medical help.
Jumper cable specifications:
•
Minimum cable cross-section of
25 mm or approx. 2 AWG
2
6.
After the engine has started, remove
jumper cables by exactly reversing
the above installation sequence,
starting with the last connection
made first. When removing each
clamp, make sure that it does not
touch any other metal while the
other end is still attached.
•
Maximum length of 11.5 ft
(3.5 m).
A battery will also produce hydrogen
gas, which is flammable and very
explosive. Keep flames or sparks
away from battery, avoid improper
connection of jumper cables,
smoking etc..
109
| Categories | Mercedes-Benz Manuals, Mercedes-Benz S-Class Manuals |
|---|---|
| Document Type | Free PDF Owner's Manual Download. |
| Tags | Mercedes-Benz S350, Mercedes-Benz S350 TURBODIESEL, Mercedes-Benz W140 |
| Model Year | 1994 |
| Download File |
|
| Document File Type | |
| Publisher | bayhas.com |
| Wikipedia's Page | Mercedes-Benz S-Class |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)