2006 Johnson 9.9 15 hp R RL RHL TE TEL 2-Stroke Outboard Owners Manual

OIL
MIXING FUEL AND OIL
Evinrude/Johnson  XD30™   Formula  outboard
oil is recommended for your outboard.    It con-
tains a richer additive package than other TC-W3
oils,  minimizing  carbon  build-up  and  deposits  on
pistons  and   bearing  surfaces.  It   provides  25%
greater detergency than minimum TC-W3 require-
ments.
Evinrude/Johnson brand oils are formulated to give
best  engine  performance  while  controlling  piston
and combustion chamber deposits, providing supe-
rior lubrication and ensuring maximum spark plug
life.
Use the following chart and these guidelines to mix
oil with the engine’s fuel.
Fuel
Ratio
50:1
25:1
6 U.S. Gallons
16 fl. oz. oil
3 U.S. Gallons
8 fl. oz. oil
1 Liter
20 ml oil
40 ml oil
32 fl. oz. oil
16 fl. oz. oil
Portable Tank
Above and below 32° F (0°C), add one gallon of fu-
el. Pour in required amount of oil. Add remaining fu-
el. Install filler cap and tip tank gently to distribute
oil.
If Evinrude/Johnson XD30 Formula outboard oil is
not available, you must use an NMMA-certified TC-
W3 oil such as Evinrude/Johnson direct injection oil
or Evinrude biodegradable outboard oil.
IMPORTANT: Failure to follow this recommenda-
tion could void the engine warranty if a lubrication-
related failure occurs.
ADDITIVES
IMPORTANT: Only use fuel additives approved by
BRP for your outboard. Use of other fuel additives
can result in poor performance or engine damage.
Evinrude/Johnson 2+4 fuel conditioner will help
prevent gum and varnish deposits from forming in
fuel system components and will remove moisture
from the fuel system. It can be used continuously
and should be used during any period when your
engine is not being operated on a regular basis. Its
use will reduce spark plug fouling, fuel system icing,
and fuel system component deterioration.
Permanently Installed Tank
Above 32° F (0° C), pour oil slowly with the fuel as
tank is filled. Below 32° F (0° C), add one gallon of
fuel  to   a  separate  container.   Pour  in   required
amount of oil. Install filler cap and tip container gen-
tly to distribute oil. Slowly pour oil/fuel mixture into
tank with fuel as tank is filled.
FUEL/OIL RATIO
New Engine
During break-in, you must use a 25:1 (4% oil) fuel/
oil  ratio  in  your  fuel  tank.  Refer  to  Break-In  (10
Hours).
Normal Operation
After break-in, the engine must be operated at a
50:1 (2% oil) fuel/oil ratio.
High Performance
During high performance operation you must use a
25:1 (4% oil)
fuel/oil ratio in your fuel tank.
Fuel and Oil - 14
Product Specification
CategoriesBRP Brand Manuals, Johnson 2-Stroke Manuals, Johnson Brand Manuals, Johnson Outboard Manuals
Document TypeBoat Motor Manual. Marine Operator's Engine Guide.
Tags, , , , , ,
Model Year2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 54 pages
Document File TypePDF
Publisherjohnson.com
Wikipedia's PageJohnson Outboards
CopyrightAttribution Non-commercial
(1 votes, average: 5 out of 5)
Marine readers have rated 2006 Johnson 9.9 15 hp R RL RHL TE TEL 2-Stroke Outboard Owners Manual 5.0 out of 5.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

2006 Johnson 9.9 15 hp R RL RHL TE TEL 2-Stroke Outboard Owners Manual SKU UPC Model
Jack smith on Jun 04, 2013.



Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website