Installation
6.
7.
Turn the rotary handle in the direction of
arrow 6 as far as the
symbol to insert the
The wind deflector is stored in a protective
cover in the cargo bay. Brief instructions for
operation can be found on the protective cover.
left fastening pin into the holders.
Fold up the top section of the wind deflec-
tor.
1.
Remove the wind deflector from the protec-
tive cover and unfold it, arrows 1.
With the wind deflector installed: do not
recline the front-seat backrests too far if
the seat is to be slid all the way back, as this
would damage the wind deflector.<
Only turn the rotary handle within the
range between the two symbols, other-
wise the cable system inside the wind deflector
could be damaged.<
Removing the wind deflector
Proceed in the reverse order as used for instal-
lation.
2.
Press together the top and bottom sections
until the catch engages, arrow 2.
Protective caps are provided in the vehicle for
the holders of the wind deflector.
Folding
3.
4.
Push the fastening pin, arrow 3, into the
opening provided on the right side of the
vehicle until it snaps into place. Remove the
protective caps beforehand, if necessary.
Slide the red release lever towards the middle of
the wind deflector and push the two halves
apart.
Push the fastening pin, arrow 4, into the
opening provided on the left side of the
vehicle until it snaps into place.
Loading function
Cargo can still be loaded on the rear seat of the
vehicle even if the wind deflector has been
installed.
5.
Turn the rotary handle in the direction of
arrow 5 as far as the first stop to insert the
right fastening pin into the holders.
43
Online Edition for Part no. 01 41 0 013 670 - © 02/07 BMW AG
| Categories | BMW 3-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 328i, BMW 328xi, BMW 335i, BMW E92, BMW E93 |
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)