Operation
Engine compartment
୴
୴̈ Open the hood (୴ page 341).
For more information on engine oil, see
“Technical data” section (୴ page 522) and
̈
̈
̈
Pull out oil dipstick 1.
(
୴ page 525).
Wipe oil dipstick 1 clean.
Adding engine oil
Fully insert oil dipstick 1 into the
dipstick guide tube.
!
Only use approved engine oils and oil filters
required for vehicles with Maintenance System.
For a listing of approved engine oils and oil
filters, refer to the Factory Approved Service
Products pamphlet (USA only) in your vehicle
literature portfolio, or contact an authorized
Mercedes-Benz Light Truck Center.
̈
Pull out oil dipstick 1 again after
approximately 3 seconds to obtain
accurate reading.
The oil level is correct when it is be-
tween lower mark 3 (min.) and upper
mark 2 (max.) of the oil dipstick.
Example illustration ML 320 CDI (ML 350,
ML 550 similar)
1 Filler cap
Using engine oils and oil filters of specification
other than those expressly required for the
Maintenance System, or changing of oil and oil
i All models (except ML 63 AMG):
The filling quantity between the upper and lower filter at change intervals longer than those called
marks on the oil dipstick is approximately
2.1 US qt. (2.0 l).
for by the Maintenance System will result in
engine or emission control system damage not
covered by the Mercedes-Benz Limited
Warranty.
ML 63 AMG:
The filling quantity between the upper and lower
marks on the oil dipstick is approximately
1.6
US qt. (1.5 l).
̈
If necessary, add engine oil
(
୴ page 344).
ML 63 AMG
1
Filler cap
344
| Categories | Mercedes-Benz M-Class Manuals, Mercedes-Benz Manuals |
|---|---|
| Tags | Mercedes-Benz ML320 CDI, Mercedes-Benz ML350, Mercedes-Benz ML550, Mercedes-Benz ML63 AMG, Mercedes-Benz W164 |
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
Comments are closed.