DO-IT-YOURSELFMAINTENANCE 6
27
FOR MORE INFORMATION
ABOUTYOURHYUNDAI
HEADLIGHT AIMING ADJUST-
MENT
G250A01A-AAT
G290A03O-AAT
6. Draw a vertical line (through the center
of each headlight beam pattern) and a
horizontal line (through the center of
each headlight beam pattern) on the
aiming screen measured from ground
to center mark on headlight lens.
7. Adjust the right side of each cut-off line
of the low beam to the horizontal line
with a phillips screwdriver - VERTICAL
AIMING.
If you desire additional information about
maintaining and servicing your Hyundai,
you may purchase a factory Shop Manual
atyourHyundaidealer'spartsdepartment.
This is the same manual used by
dealershiptechniciansandwhileitishighly
technical it can be useful in obtaining a
better understanding of your car and how
it works.
Before performing aiming adjustment,
make sure of the following.
1. Keep all tires inflated to the correct
pressure.
2. Place the vehicle on level ground and
press the front bumper & rear bumper
down several times.
Place vehicle at a distance of 118 in.
(3m) from the test wall.
Seethatthevehicleisunloaded(except
for full levels of coolant, engine oil and
fuel, and spare tire, jack, and tools).
Have the driver or equivalent weight
placed in driver's seat.
3.
!
WARNING:
Never attempt to adjust the horizontal
alignmentofyourheadlights. Horizontal
aiming must be adjusted by an
authorized Hyundai dealer to avoid
incorrect alignment that will reduce the
effectiveness of your headlights.
4.
5.
Clean the headlight lenses and turn on
the headlights (Low beam).
Open the hood.
Vertical
aiming
G290A01NF-A
| Categories | Hyundai Manuals, Hyundai Sonata Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document Type | Owners Manual |
| Language | English |
| Product Brand | Hyundai, Sonata |
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)