handle. Hold the “Z” fitting with the pliers, not the
cable, to avoid damaging the cable.
Lower Chute
NOTE: The upper hole in the control handle provides
for adjustment in belt tension. Refer to page 9 of this
manual for instructions.
Nut
Carriage
Bolt
Flat
Washer
Flat
Washer
Assembling Discharge Chute
Hex Bolt
•
•
•
Turn the chute crank until the chute faces straight
to the front. See Figure 4 .
Remove the hand knob, flat washer and carriage
bolt from the upper chute. See Figure 4.
Pivot the upper chute up and over the lip of the
lower chute. This will eliminate any gap between
the upper and the lower chutes. Secure with
hardware just removed.
Upper
Chute
Hand
Knob
Figure 4
SECTION 3: KNOW YOUR SNOW THROWER
WARNING: Be familiar with all the controls on the snow thrower and their proper operation. Know how to
stop the machine and disengage them quickly.
Auger Control Handle
Recoil Starter
Chute Crank
Primer
Key
Electric Starter
Gasoline Cap
Spark Plug Access
Discharge Chute
Oil Fill Plug
Choke Lever
Off
On
Auger
Shave Plate
Figure 5
Auger Control Handle
Chute Crank
Located on the upper handle, the auger control handle
is used to engage and disengage the auger. The snow
thrower is designed to propell by the rotation of the
auger. Pull the control handle back against the upper
handle to engage the auger; release to disengage.
Located on right side of dash panel, the chute crank
determines the direction that snow will be discharged.
Turn clockwise to discharge snow to the left; turn
counterclockwise to discharge to the right.
6
| Categories | Cub Cadet Snow Blower Manuals, MTD Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Cub Cadet 721E, MTD 721E, MTD Snow Blower Manual |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)