english / USA
Operating Instructions
If the engine still does not start:
During break-in period
:
Move stop switch to $
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period.
5
As all moving parts have to bed in during
the break-in period, the frictional
resistances in the engine are greater
during this period. The engine develops
its maximum power after about 5 to 15
tank fillings.
4
:
:
:
:
Pull off the spark plug boot (5).
Unscrew and dry off the spark plug.
Open the throttle fully.
During operation
After a long period of full-throttle
operation, allow engine to run for a while
at idle speed so that the heat in the
engine can be dissipated by flow of
cooling air. This protects engine-
mounted components (ignition,
Pull the starter rope several times to
clear the combustion chamber.
Fuel tank run until dry
After refueling, press the fuel pump
bulb (4) at least five times – even if
the bulb is filled with fuel.
:
Refit the spark plug and connect the
spark plug boot – push it down
firmly.
carburetor) from thermal overload.
After finishing work
Wait for engine to cool down. Drain the
fuel tank. Store the machine in a dry
place. Check tightness of nuts and
screws (not adjusting screws) at regular
intervals and retighten as necessary.
:
:
:
Move stop switch to I
Set choke lever to e
:
Now start the engine.
–
even if the engine is cold.
:
Now start the engine.
18
BR 45
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Blower and Vacuum Manuals |
|---|---|
| Tags | STIHL BR 45 |
| Download File |
|
| Language | English |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)