6qwvtur8h
i
r
Dsurrtvr
hvshp
vyh
uvtuhyvqr
hrhyrry)
Slight readjustment of the carburetor
may be necessary:
6qwvtvqyrrrq
It is usually necessary to change
the setting of the idle speed
adjusting screwG6 after every
correction to the low speed
adjusting screwG.
•
•
•
Check the air filter
and clean it if necessary.
Check spark arresting screen (if
fitted) and clean it if necessary.
Mount the cutting head and trim
@tvruvyrvqyvt
H L
LA
lines to correct length:
Lines must extend as far as
line limiting blade on the deflector.
Start the engine and adjust idling
speed correctly with the idle speed
adjusting screwG6-
the cutting tool must not rotate.
Turn the idle speed
adjusting screwG6
clockwise until engine runs
smoothly - cutting
•
tool must not rotate.
•
Warm up the engine.
8vty
hrur
rtvrvvqyvt
H
Hhhtrr
6uvtuhyvqr)
Turn the high speed adjusting
screwC and low speed adjusting
screwG clockwise (leaner) or as
far as stop.
Turn the idle speed adjusting
screwG6 counterclockwise until
cutting tool stops rotating -
then back off screw about
another one half turn from that
position.
Exhaust emissions are controlled by the
design of the fundamental engine
parameters and components
(e.g. carburetion, ignition, timing and
valve or port timing) without the addition
of any major hardware.
6rhyrry)
Turn the high speed adjusting
screwC and low speed adjusting
screwG counterclockwise (richer)
or as far as stop.
@ hvpvqyvtiruhv
hppryr
hv
Your carburetor is preset at the factory.
This is the optimum setting under the
barometric pressure and climatic
conditions at the factory and is suitable
for most operating sites.
Idle setting is too lean.
Turn the low speed adjusting
screwG counterclockwise until
engine runs and accelerates
smoothly.
It ensures that your machine will run
smoothly, be fuel efficient, operate
reliably and produce low emissions.
AT"%#
!
| Categories | Blower Vacuum and Sweeper Manuals, STIHL Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL FS 36 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)