English / USA
Storing the Machine
Lubricating the
Gearbox
Sharpening
Metal Cutting Tools
For periods of about 3 months or longer:
:
Use a file (special accessory) to
sharpen cutting tools. In case of
more serious wear or nicks:
Resharpen with a grinder or have
work done by STIHL dealer.
:
Remove, clean and inspect the
cutting attachment.
1
:
If the CombiTool is stored
separately, fit the protective cap on
the drive tube to avoid dirt getting
into the coupling.
2
:
Resharpen frequently, take away as
little material as possible – two or
three strokes of the file are usually
enough.
:
Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
:
Check grease level regularly - about
every 25 hours of operation.
To avoid out-of-balance
:
:
Unscrew the filler plug (1).
:
After resharpening about 5 times,
have blade checked on STIHL
balancer (special accessory) and
rebalanced as necessary.
If no grease can be seen on the
inside of the filler plug, screw the
tube (2) of STIHL gear lubricant for
brushcutters - see “Special
Accessories” - into the filler hole.
:
:
Squeeze up to 1/5 oz (5 g) grease
into the gear housing.
Do not completely fill the gear
housing with grease.
Refit the filler plug and tighten it
down firmly.
FS-KM
25
| Categories | Hedge Trimmer Manuals, STIHL Hedge Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL FS, STIHL KM |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)