english / USA
Taking Care of Guide Bar
MaintainingandSharpening
Saw Chain
Correctly sharpened chain
A properly sharpened chain slices
through wood effortlessly and requires
very little feed pressure.
:
Measure groove depth –
with scale on filing gauge** in area
used most for cutting on Rollomatic
bars.
2
Do not work with a dull or damaged
chain as it will increase the physical
effort required, produce unsatisfactory
results and a higher rate of wear.
Chain type Chain pitch Minimum
groove depth
5.0 mm
Picco-Mini
3/8" P
Clean and check your chain
for cracks in the links and damaged
rivets – replace any damaged or worn
parts of the chain and match the new
parts to the shape and size of the
original parts.
(0.20")
If groove depth is less than specified:
Replace the guide bar.
:
1
3
The drive link tangs will otherwise
scrape along the bottom of the groove –
the cutters and tie straps will not ride on
the rails.
It is necessary to comply with the
angles and dimensions specified
below. If the saw chain is
incorrectlysharpened –especially
if the depth gauges are too low –
there is an increased risk of
:
Turn the bar over – every time you
sharpen the chain – and every time
you replace the chain – this avoids
one-sided wear, especiallly at nose
and underside of the bar.
kickback and resulting
injury!
.
Regularly clean
1
2
3
= oil inlet hole
= oil passage
= bar groove
**
see “Special Accessories“
HT 73
31
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL HT 73 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)