English / USA
Adjusting Position of Gearbox
Mounting the MultiTool
:
:
Insert and engage spring clip (6) in
the hole in the shaft – fold the spring
clip flat against the blade.
:
Arrange the blades in the order they
will be fitted on the shaft, noting the
following points:
Use the same procedure to mount
the blades on the left-hand side.
Left-hand and right-hand blades are
different. The direction of rotation is
marked with arrows on the gearbox
and blades. Make sure the arrows
point in the same direction.
:
:
:
Loosen clamp screws on gearbox.
Turn gearbox 180°.
6
Line up the gearbox in the correct
position.
:
Tighten down the two clamp screws
on the gearbox in the following
sequence:
5
4
–
–
–
–
Tighten first screw moderately.
Tighten second screw moderately.
Tighten down first screw firmly.
Tighten down second screw firmly.
:
:
Rotate the inner, right-hand blade
(4) on the shaft until it can be
pushed into position – check the
direction of rotation again (arrows).
The hub of the inner blade is larger
than that of the outer blade.
Rotate the outer, right-hand blade
(
5) on the shaft until it can be
pushed into position – check the
direction of rotation again (arrows).
14
RL-MM
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL MM, STIHL RL |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)