during brake applications to clean the rotors is
not reached.
Determining loading limit
This can also lead to long-lasting decreases in
comfort and squeaking noise during braking.
These decreases in comfort can also be pro-
duced by long braking maneuvers with a low
pedal pressure.
Should corrosion form on the brake rotors, the
brakes will tend to respond with a pulsating
effect that even extended application will fail to
cure.
1.
2.
Locate the following statement on your
vehicle's placard*:
For technical information about the brake sys-
tem, refer to page 122.
The combined weight of occupants
and cargo should never exceed
XXX lbs. or YYY kg, as otherwise the vehicle
may be damaged and unstable driving con-
ditions may result.<
When vehicle is parked
Condensation forms in the air conditioner sys-
tem during operation, and then exits under the
vehicle. Traces of condensed water under the
vehicle are therefore normal.
Determine the combined weight of the
driver and passengers that will be riding in
your vehicle.
Before driving into a car wash
3.
4.
Subtract the combined weight of the driver
and passengers from XXX lbs. or YYY kg.
Fold in the exterior mirrors, refer to page 53,
otherwise they could be damaged due to the
width of the vehicle.
The resulting figure equals the available
amount of cargo and luggage load capacity.
For example, if the XXX amount equals
You can find valuable information on this topic
under Care, starting on page 220.
800
lbs. and there will be four 150-lb. pas-
sengers in your vehicle, the amount of avail-
able cargo and luggage load capacity is
Cargo loading
200
800
lbs.:
lbs. minus 600 lbs. = 200 lbs.
To avoid loading the tires beyond their
approved carrying capacity, never over-
load the vehicle. Overloading can lead to over-
heating and increases the rate at which damage
develops inside the tires. The ultimate result
can assume the form of a sudden blow-out.<
5.
6.
Determine the combined weight of luggage
and cargo being loaded on the vehicle. That
weight may not safely exceed the available
cargo and luggage load capacity calculated
in step 4.
Make sure that no fluids leak in the cargo
bay; otherwise the vehicle could be dam-
aged.<
If your vehicle will be towing a trailer, part of
the load from your trailer will be transferred
to your vehicle. Consult the manual for
transporting a trailer to determine how this
may reduce the available cargo and luggage
load capacity of your vehicle.
120
Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64, BMW M6 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)