Only attach tow ropes to the tow fittings, as
attachment to other vehicle parts can lead to
damage.<
Sequential Manual Transmission with
Drivelogic
1.
Switch on the hazard warning flashers,
comply with country-specific regulations.
With tow truck
2.
3.
4.
Switch on the ignition, refer to page 60.
Tow-start in selector lever position N.
Do not tow the vehicle with only the front
or rear axle raised, as otherwise the
engine may be damaged or the steering can
turn to the left or right.<
Move the selector lever into the drive posi-
tion and pull toward + within 2 seconds.
The correct gear will be selected and
engaged automatically.
5.
6.
Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
Have the vehicle checked.
Have the vehicle transported on a flatbed sur-
face only.
Tow-starting
Do not tow-start the vehicle if possible, but
instead start the engine by means of jump start-
ing, refer to page 234. Vehicles equipped with a
catalytic converter should only be tow-started
when the engine is cold.
Manual transmission
1.
Switch on the hazard warning flashers,
comply with country-specific regulations.
2.
3.
4.
Switch on the ignition, refer to page 60.
Shift into 3rd gear.
Tow-start with the clutch completely
depressed and slowly release the clutch.
After the engine starts, immediately
depress the clutch again completely.
5.
6.
Stop at a suitable location, remove the tow
bar or rope and switch off the hazard warn-
ing flashers.
Have the vehicle checked.
237
Online Edition for Part no. 01 41 2 600 775 - © 08/08 BMW AG
| Categories | BMW 6-Series Manuals, BMW Manuals |
|---|---|
| Tags | BMW 650i, BMW E63, BMW E64, BMW M6 |
| Model Year | 2009 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)