Driving your vehicle
WARNINGS AND INDICATORS
Warning lights / audible indicators
Checking operation
All warning lights are checked by turning
the ignition switch ON (do not start the
engine). Any light that does not illuminate
should be checked by an authorized Kia
dealer.
After starting the engine, check to make
sure that all warning lights are off. If any
are still on, this indicates a situation that
needs attention. When releasing the
parking brake, the brake system warning
light should go off. The fuel warning light
will stay on if the fuel level is low.
OJB040043
1JBN4055
ECO ON/OFF mode (if equipped)
You can turn the ECO indicator on/off on (if equipped)
the instrument cluster in this mode.
Instrument panel illumination
When the vehicle’s parking lights or Anti-lock brake system
headlights are on, rotate the illumination (ABS) warning light (if
equipped)
If you push the TRIP button more than 1
second in the ECO ON mode, ECO OFF
is displayed and the ECO indicator turns
off.
If you want to display the ECO indicator
again, press the TRIP button more than 1
second in the ECO OFF mode and then
ECO ON mode is displayed.
ABS
control knob to adjust the brightness of
the instrument panel illumination.
This light illuminates if the key is turned
to ON and goes off in approximately 3
seconds if the system is operating nor-
mally.
If the light stays on, you may have a
problem with your ABS. Contact an
authorized Kia dealer as soon as possi-
ble.
For more detailed explanations, refer to
"Warnings and indicators" in section 4.
4
25
| Categories | Kia Manuals, Kia Rio Manuals |
|---|---|
| Model Year | 2010 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)