2010 Kia Rio Owners Manual

In case of an emergency
OJB048024
1JBA6025
OJB048026
7.
Loosen the  wheel  lug nuts  coun-     8. Place the jack  at the  front or rear     9. Insert the jack handle into  the jack
terclockwise one turn each, but do         jacking position  closest to  the tire         and  turn it  clockwise,  raising  the
not  remove any  nut  until  the tire         you  are  changing. Place the  jack         vehicle until the tire  just clears the
has been raised off the ground.              at the  designated locations under         ground.    This   measurement    is
the  frame.  The  jacking  positions
are  plates  welded   to  the  frame
with two  tabs and  a raised  dot to
index with the jack.
approximately
30  mm  (1.2   in).
Before  removing   the  wheel   lug
nuts, make sure the vehicle is sta-
ble and that there is no chance for
movement or slippage.
WARNING - Jack  location
To   reduce   the   possibility   of
injury, be  sure  to  use only  the
jack  provided  with  the  vehicle
and in the correct jack position;
never use  any other part  of the
vehicle for jack support.
10. Remove  the  wheel  lug nuts  by
turning   them  counterclockwise,
then remove the wheel.
11. Mount the spare tire into position
and  install  the   wheel  lug  nuts
with the beveled edge inward.
6
21
Product Specification
CategoriesKia Manuals, Kia Rio Manuals
Model Year2010
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 236 pages
Document File TypePDF
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field