•
•
Take all possible precautions when leaving the unit
unattended. Disengage the collector/impeller, shift
into neutral, stop the engine, and remove the key.
When cleaning, repairing, or inspecting, make
certain collector/impeller and all moving parts have
stopped. Disconnect the spark plug wire and keep
away from the plug to prevent accidental starting.
Do not run an engine indoors. When starting the
engine and transporting the snow thrower in or out
of a building, open the doors. Exhaust fumes are
dangerous.
Do not clear snow across the face of slopes.
Exercise extreme caution when changing direction
on slopes. Do not attempt to clear steep slopes.
Never operate the snow thrower without guards,
plates, or other safety protection devices in place.
Never operate the snow thrower near glass
enclosures, automobiles, window wells, drop off,
etc., without proper adjustments of snow thrower
discharge angle. Keep children and pets away.
Do not overload the machine capacity by attempting
to clear snow at too fast a rate.
•
•
•
Use only attachments and accessories approved by
the manufacturer of snow thrower (such as wheel
weights, counter weights, cabs, etc.).
Never operate the snow thrower without good
visibility or light. Always be sure of your footing and
keep a firm hold on the handles. Walk, never run.
The muffler and engine become hot and can cause
a burn. Do not touch these areas.
•
•
Maintenance And Storage
•
Check the shear bolts, engine mounting bolts, etc.,
at frequent intervals for proper tightness to be sure
the equipment is in safe working condition.
•
•
•
Never store the machine with fuel in the fuel tank
inside a building where ignition sources are present,
such as hot water and space heaters, clothes
dryers, and the like. Allow the engine to cool before
storing in any enclosure.
•
•
Always refer to the operators manual instructions
for important details if the snow thrower is to be
stored for an extended period.
•
•
Never operate the machine at high transport speeds
on slippery surfaces. Look behind and use care
when backing.
Never direct discharge at bystanders or allow
anyone in front of unit.
Run the machine a few minutes after throwing snow
to prevent freeze up of collector/impeller. Check
clutch controls periodically to verify that they
engage and disengage properly and readjust if
necessary. Refer to the operators manual for
adjustment instructions.
•
•
Disengage power to collector/impeller when
transporting or not in use.
Your Responsibility
Restrict the use of this power machine to persons who read, understand and follow the warnings and
instructions in this manual and on the machine. Some of the safety labels on the equipment are
reproduced below. Take a moment to study these labels before operating the unit. Always maintain
safety while operating or servicing the equipment.
AGWNAY.
AND CLOTHI
WARNING
KEEP HANDS, FEET
NG AUGROTATIER
-
MORF YRUJ INIDOVA
1. STOP ENGINE BEFORE REMOVING
DEBRIS AND SERVICING UNIT.
SHUT OFF ENGINE
BEFORE
UNCLOGGING
2. KEEP CLEAR OF IMPELLER WHILE
ENGINE IS RUNNING.
3
. NEVER DIRECT DISCHARGE AT
BYSTANDERS OR WINDOWS OR
ALLOW ANYONE IN FRONT OF
UNIT.
DISCHARGE CHUTE.
4
. THOROUGHLY INSPECT THE AREA
WHERE THE EQUIPMENT IS TO BE
USED AND REMOVE ALL DOOR
DANGER
MATS, SLEDS, BOARDS, WIRES AND
OTHER FOREIGN OBJECTS.
5
. REFER TO OWNERS MANUAL FOR
FULL INSTRUCTIONS.
4
| Categories | Cub Cadet Snow Blower Manuals, MTD Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Cub Cadet 1130 SWE, Cub Cadet 826 SWE, MTD 1130 SWE, MTD 826 SWE, MTD Snow Blower Manual |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)