3
NOTE: This Operators Manual covers a range of product
specifications for various models. Characteristics and
features discussed and/or illustrated in this manual may
not be applicable to all models. Troy-Bilt LLC reserves
the right to change product specifications, designs and
equipment without notice and without incurring obligation.
Rubber Boot
Setting Up
Your Lawn
Tractor
Attaching the Battery Cables
NOTE:the factory.TheIfbatterythis is themaycase,haveskipalreadythis beenstep. installed at
NOTE: The positive battery terminal is marked Pos. (+).
The negative battery terminal is marked Neg. (–).
•
The positive cable (heavy red wire) is secured to the
positive battery terminal (+) with a hex bolt and hex
nut at the factory. Before attaching the negative cable,
note the date on the side of the battery. If the battery
is put into service after this date, charge the battery
as instructed in the Maintaining Your Lawn Tractor
section of this manual prior to operating the tractor.
Hex Bolt
Hex Nut
WARNING
Figure 3-1
•
•
Removecable. the hex bolt and hex nut from the negative
Remove the black plastic cover, if present, from the
negative battery terminal and attach the negative
cable (heavy black wire) to the negative battery
terminal (–) with the bolt and nut.
Use extreme care
when handling
gasoline. Gasoline is
extremely flammable
and the vapors are
explosive. Never fuel
machine indoors
or while the engine
is hot or running.
Extinguish cigarettes,
cigars, pipes, and
other sources of
ignition.
Attaching The Seat
NOTE: For shipping reasons, seats are either fastened
to the tractor seat’s pivot bracket with a plastic tie, or
mounted backward to the pivot bracket. In either case,
free the seat form its shipping position and remove the
two hex screws (or knobs, on models so equipped) from
the bottom of seat before proceeding with applicable
instructions below.
1.
Position the shoulder screws (found on the base of the
seat) inside the slot openings in the seat pivot bracket.
Fig. 3-2.
2.
Slide the seat slightly rearward in the seat pivot
bracket, lining up the rear slots in the pivot bracket
with the remaining two holes in the seat’s base.
NOTE: This Operators
Manual covers a range
of product specifications
for various models.
3. theSelecttwodesiredknobs removedposition forearlier.the seat,See andFig. secure3-2. with
Figure 3-
Characteristics and fea-
tures discussed and/or
illustrated in this manual
may not be applicable
to all models. Troy-Bilt
LLC reserves the right
to change product
specifications, designs
and equipment without
notice and without incur-
ring obligation.
8
| Categories | Lawn Mower Manual, MTD Lawn Mower Manuals, Troy-Bilt Lawn Mower Manuals |
|---|---|
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Lawn Mower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)