the control handle. Hold the “Z” fitting with the
pliers, not the cable, to avoid damaging the cable.
•
•
Secure eyebolt with 5/16” saddle washer and hex
nut. The cupped side of washer goes against the
handle. Adjust lower hex nut until the eyebolt is
positioned so that the chute crank turns freely
(does not bind).
NOTE: The upper hole in the control handle provides
for adjustment in belt tension. Refer to Belt Tension
Adjustment Section of this manual for instructions.
Move upper hex nut down against the lower
handle. Tighten lower hex nut securely.
Installing chute crank
•
Thread one 5/16” hex nut all the way onto the
eyebolt. See Figure 5. All necessary hardware is
included in the hardware pack shipped with your
unit. See Figure 2 for more details.
Assembling the chute
The snow thrower has been shipped with the upper
chute pivoted all the way down. Assemble as follows:
•
Slide the eyebolt onto the chute crank. Insert
eyebolt into the hole in the lower handle.
•
Turn the chute crank until the chute faces straight
to the front. See Figure 7.
Chute Crank
Eye Bolt
Flat
Washer
Hand
Knob
Carriage
Bolt
Front
Hex
Nuts
Saddle
Washer
Upper
Chute
Figure 7
Figure 5
•
•
Remove the hand knob, flat washer and carriage
bolt from the upper chute. See Figure 7.
•
•
Insert the chute crank into the coupler at the top
right side of the snow thrower. See Figure 6.
Rotate the crank to align holes, and insert the
cotter pin. Bend ends of cotter pin in opposite
directions to secure. See Figure 6.
Pivot the upper chute up so that there is no gap
between the upper and the lower chute. See
Figure 8. Secure with hardware just removed.
Cotter Pin
No
Gap
Chute Crank
Coupler
Pivot
upper
chute
Figure 6
Figure 8
6
| Categories | MTD Snow Blower Manuals, Snow Blower Manuals, White Outdoor Snow Blower Manuals |
|---|---|
| Tags | MTD SB45, MTD SB55, MTD Snow Blower Manual, White Outdoor SB45, White Outdoor SB55 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | MTD, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)