FEATURES/OPERATIONS
Hybrid Synergy Drive System
Starting the Hybrid System
The Hybrid Synergy Drive System utilizes a computer
controlled gasoline engine and electric motor to
provide the most efficient combination of power for
the vehicle. To conserve energy, when the brakes
are applied, braking force generates electricity
which is then sent to the battery. In addition, the
engine shuts off when the vehicle is stopped. The
benefits are better fuel economy, reduced vehicle
emissions and improved performance.
Insert key*.
Depress the brake pedal, and push the
“POWER” button briefly and firmly.
The “READY” light will blink. After a few
seconds, when the light remains on and a beep
sounds, you may begin driving.
Note: Fuel consumption and energy information of
the Hybrid System are shown on the multi-
information display.
*It is not necessary to insert the ignition key (key
fob) if smart key system is installed and activated.
Tips for improved fuel economy
Without pressing down on the brake pedal
The brake pedal must be depressed to turn the
Hybrid System on. If the brake pedal is not
depressed, pressing “POWER” will change the
operation mode in succession from:
Ensure tire pressures are maintained at levels
specified in the Owner's Manual.
Link trips, if possible, to reduce engine cold starts.
Avoid driving at speeds that are higher than
necessary, especially on the highway.
When possible, avoid sudden stops to maximize
regenerative braking energy.
ACC Accessories such as the radio will operate.
Minimize use of the air conditioning.
Ignition is on, Hybrid System is not
engaged.
-IG-ON
OFF
All systems OFF.
•The vehicle has both high voltage DC and AC systems
as well as a 12-volt system. DC and AC high voltage
are both very dangerous and can cause death, severe
burns, electric shock or other serious injuries.
•In order to avoid personal injuries, do not touch,
remove or replace high voltage cables which are
colored orange, and/or their connectors, high voltage
parts such as the inverter unit, hybrid vehicle battery,
etc.
Turning off the Hybrid System
Refer to the Owner’s Manual for more details.
Depress the brake pedal, then push the
button above the shifter.
Park
Push the “POWER” button to turn off the system.
Refer to the Owner’s Manual for more details.
10
11
| Categories | Toyota Manuals, Toyota Prius Manuals |
|---|---|
| Model Year | 2005 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)