MTD White Outdoor 616 Hydrostatic Tractor Lawn Mower Owners Manual

4
Operating
Your Lawn
Tractor
NOTE: Cruise control cannot be engaged  at the tractor’s
fastest ground speed. If the operator should attempt to do
so, the tractor will automatically decelerate to the fastest
optimal mowing ground speed.
Moving the Tractor Manually
Your tractor’s transmission is equipped with a hydro-
static relief valve for occasions when it is necessary  to
move the tractor manually. Activating this valve forces
the fluid in the transmission to bypass its normal  route,
allowing the rear tires to “freewheel.” To engage the
hydrostatic relief valve, proceed as follows:
Disengage the cruise control using one of the  following
methods:
Depress the brake pedal to disengage the cruise
control and stop the tractor.
Lightly depress the drive pedal.
Locate the hydrostatic bypass rod in the rear of the
tractor. See Figure 4-7.
Engaging the Blades
Engaging the PTO (Blade Engage) transfers power to the
cutting deck or other (separately available)  attachments.
To engage the blades, proceed as follows:
1.
Move the throttle control lever to the FAST (rabbit)
position.
Models with Manual PTO
2.
a. Graspthe waytheforwardPTO (Bladeinto theEngage)engagedlever(ON)andposition.pivot it all
WARNING
Models with Electric PTO
b. Pull the PTO (Blade  Engage) knob outward into the
Hydrostatic Bypass Rod
engaged (ON) position.
NOTE: Do not mow on
inclines with a slope in
excess of 15 degrees
(a rise of approxi-
3.
Keep the throttle lever in the FAST (rabbit)  position
for the most efficient use of the cutting  deck or other
(separately available) attachments
Figure 4-
Ptoulockll theithinydplace.rostatic bypass rod outward, then  down,
IMPORTANT: The engine (on models with a manual PTO)
or electric PTO clutch (on models with  an electric PTO)
will automatically shut off if the PTO is engaged  with the
shift lever in position for reverse travel with the ignition
key in the NORMAL MOWING position. Refer to Safety
Interlock Switches earlier in this section.
mately 2-1/2 feet every
NOTE: The transmission will NOT  engage when the
hydrostatic bypass rod is pulled out. Return the rod to its
normal position prior to operating the tractor.
10
feet). The tractor
could overturn and
cause serious injury.
IMPORTANT: Never attempt to move the tractor manu-
ally without first engaging the hydrostatic relief valve.
Doing so will result in serious damage to the tractor’s
transmission.
Using the Deck Lift Lever
NOTE: To help avoid
blade contact or a
thrown object injury,
keep bystanders, help-
ers, children and pets
at least 75 feet from
the machine while it
is in operation. Stop
machine if anyone
enters the area.
To raise the cutting deck, move the deck  lift lever to the
left, then place it in the notch best suited for your applica-
tion. Refer to Setting The Cutting Height earlier  in this
section.
Setting The Cruise Control
NwhileOTEtraveling: The cruinisethecoforwardntrol feadirection.ture should only be utilized
Slowlyuntil thedepressdesiredthespeedupperis achieved.portion of the drive pedal
Lightly depress the cruise control button.
While continuing to hold the cruise button  in, lift your
foot from the drive pedal (you should feel the cruise
latch engage).
Once engaged, the cruise control button  and the
drive pedal will lock in the “down” position,  and the
tractor will maintain the same forward speed.
18
Product Specification
CategoriesLawn Mower Manual, MTD Lawn Mower Manuals, White Outdoor Lawn Mower Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 64 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Lawn Mower
Product TypeWalk Behind Mower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website