UNDERSTANDING THE FEATURES OF YOUR VEHICLE
97
Fog Lights — If Equipped
If either light rem ains on and does not flash, or there is a
very fast flash rate, check for a defective outsid e light
bulb. If an ind icator fails to light when the lever is
moved , it would suggest that the fuse or ind icator bulb is
defective.
The front fog light switch is on the Multi-Function
Control Lever. To activate the front fog lights, turn
on the parking lights or the low beam head lights
and pull out the end of the control lever.
3
NOTE: The fog lights will only operate with the head -
lights on low beam . Selecting high beam head lights will
turn off the fog lights.
Highbeam/Lowbeam Select Switch
Pull the Multi-Function Control Lever tow ard s you to
switch the head lights to HIGH beam . Pull the control
lever a second time to switch the head lights to LOW
beam .
Turn Signals
Move the Multi-Function Control Lever up or down and
the arrow s on each side of the instru ment cluster flash to
show prop er operation of the front and rear turn signal
lights. You can signal a lane change by moving the lever
partially up or down withou t moving beyond the detent.
Passing Light
You can signal another vehicle with you r head lights by
lightly pulling the Multi-Function Control Lever tow ard
you . This will cause the head lights to turn on at high
beam and rem ain on until the lever is released .
| Categories | Chrysler Manuals, Chrysler PT Cruiser Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)