STIHL HL 90 Hedge Trimmer Owners Manual

English / USA
Operating instructions
The power tool
!
Warning
has a large range.
In order to reduce
theriskof  personal
or even fatal injury
to bystanders from
falling objectsor inadvertent contact with
the moving cutter blades of your power
tool always keep bystanders at least 17
feet (5 m) away when the power tool is
running.
!
Warning!
5m (17ft)
Observe the cutting blades at all times –
do not cut any areas of the hedge that
you cannot see. When cutting the top of
a taller hedge, check the other side of
the hedge frequently for bystanders,
animals and obstructions.
Do not operate your power tool using the
starting throttle lock, as you do not have
control of the engine speed.
In the event of an emergency, switch off
the engine immediately – move the slide
control / stop switch to 0 or STOP.
Danger!
!
Warning
Your power tool is not
insulated against electric
shock. To reduce the risk
The cutter blades continue to move for a
short period after the throttle trigger is
released (flywheel effect).
Stop the engine and cutting tool
immediately if you are approached.
of electrocution, never
!
Warning!
operate this power tool in the vicinity of
any wires or cables (power, etc.) which
may be carrying electric current.
Accelerating the engine while the blades
are blocked increases the load and will
cause the clutch to slip continuously.
This may result in overheating and
damage to important components (e.g.
clutch, polymer housing components) –
which can then increase the risk of injury
from the blades moving while the engine
is idling.
Before you start work, examine the
hedge area for stones, fence wire, metal
or other solid objects which could
damage the cutter blades.
!Warning!
If the cutting tool becomes clogged or
stuck, always turn off the engine and
make sure the cutting tool has stopped
before cleaning. Grass, weeds, etc.
should be cleaned off the cutting tool at
regular intervals.
Take particular care when cutting
hedges next to or against wire fences.
Do not touch the wire with the cutting
blades. When working close to the
ground, make sure that no sand, grit or
stones get between the cutter blades.
Striking solid foreign objects such as
stones, fence wire or metal could
damage the cutting attachment and may
cause blades to crack, chip or break.
STIHL does not recommend the use of
your power tool when cutting in areas
where the blades could contact such
objects.
10
HL 90 K
Product Specification
CategoriesHedge Trimmer Manuals, STIHL Hedge Trimmer Manuals, Trimmer Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 86 pages
LanguageEnglish, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website