STIHL HL 90 Hedge Trimmer Owners Manual

English / USA
Replacing a broken rewind spring
:
Remove the rope rotor as described
under "Replacing Starter Rope and
Rewind Spring".
The bits of spring might still be
under tension and could fly apart
when you take them out of the
housing. To reduce risk of injury,
wear eye and face protection and
work gloves.
3
4
5
:
Thread the rope through the rotor
and secure it with a simple
overhand knot.
:
:
Remove spring housing and the
parts of the spring.
:
:
Coat rope rotor bearing bore with
non-resinous oil.
Lubricate the new spring with a few
drops of non-resinous oil.
Slip rotor over starter post – turn it
back and forth to engage anchor
loop of rewind spring.
:
:
Refit the pawl (5) in the rotor.
Fit the washer (4) on the starter
post.
:
Use a screwdriver or suitable pliers
to install spring clip (3) on starter
post and engage it on the pawl's peg
the spring clip must point
counterclockwise clockwise as
shown in the illustration.
:
Go to "Tensioning the rewind
spring".
HL 90 K
27
Product Specification
CategoriesHedge Trimmer Manuals, STIHL Hedge Trimmer Manuals, Trimmer Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 86 pages
LanguageEnglish, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website