STARTINGANDOPERATING
229
4Hto4Lor4Lto4H
NOTE: Shifting into or out of 4L is possible with the
vehicle completely stopped, however difficulty may oc-
cur due to the mating clutch teeth not being properly
aligned. Several attempts may be required for clutch
teeth alignment and shift completion to occur. The pre-
ferredmethodiswiththevehiclerolling2to3mph(3to
5 km/h). Avoid attempting to engage or disengage 4L
with the vehicle moving faster than 2 to 3 mph (3 to 5
km/h).
Withthevehiclerollingat2to3mph(3to5km/h),shift
anautomatictransmissiontoN(Neutral)ordepressthe
clutch on a manual transmission. While the vehicle is
coasting at 2 to 3 mph (3 to 5 km/h), shift the transfer
caseleverfirmlytothedesiredposition.Donotpausein
transfercaseN(Neutral).
NOTE: To shift from 4H to 4L, the shift lever should
pushedawayfromthedriver,andthenrearwardinto4L.
In 4H, there is a neutral stop to prevent shifting into N
(Neutral)byaccident.
5
Selec-TracாOperatingInformation/Precautions—
IfEquipped
TheSelec-Tractransfercaseprovides5modepositions-
normal 2-wheel drive mode, part-time 4-wheel drive
high range, full-time 4-wheel drive high range, neutral,
and4-wheeldrivelowrange.
NOTE: PausingintransfercaseN(Neutral)invehicles
equipped with an automatic transmission may require
shutting the engine OFF to avoid gear clash while
completingtheshift.Ifdifficultyoccurs,shiftautomatic
transmissiontoN(Neutral),holdfootonbrake,andturn
engineOFF.Makeshifttothedesiredmode.
This transfer case is equipped with an inter-axle differ-
ential which allows driving the vehicle in the 4 FULL
TIME position at all times on any given road surface
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)