Product Information
BATTERY - ELECTRIC START
MODELS
If you have automotive battery posts, place a
starwasher on the clamp adapter first, then
the main cable, and then the wires from the
accessories.
Requirements
•
12-volt, heavy-duty, designated for "marine"
use;
•
•
Vented/refillable or maintenance-free; and
Rated according to the minimum require-
ments in Specifications on page 68.
Deep-cycle batteries are suitable IF they
meet or exceed the minimum CCA require-
ments.
Ask your Dealer about your outboard’s re-
quirements before installing longer battery ca-
bles or a battery switch.
Installation
1.
2.
3.
Main cable
Starwasher
Accessory wires
WARNING
Read and understand the safety
information supplied with your bat-
tery BEFORE you begin installation.
Tighten all connections securely and coat the
installation with Triple-Guard grease.
WARNING
NOTICE
Make sure all components are
Keep the battery connections clean,
tight, and insulated to prevent their
shorting or arcing and causing an
explosion. If the battery mounting
system does not cover the connec-
tions, install covers. Check often to
see that connections stay clean and
tight.
clean and free of corrosion. Connect the
RED (+) cable to the positive (+) battery
post first. Connect the BLACK (–) cable to
the negative (–) battery post last.
Connect the RED (+) cable to the positive (+)
battery post first. Connect the BLACK (–) ca-
ble to the negative (–) battery post last.
If you have marine battery posts, install each
main cable on the clamp adapter with a star-
washer below it. Install all wires from acces-
sories on the threaded portion of the post.
1.
2.
3.
Main cable
Starwasher
Accessory wires
64
| Categories | BRP Brand Manuals, Evinrude Brand Manuals, Evinrude E-TEC Manual, Evinrude Outboard Manual |
|---|---|
| Tags | Evinrude 40 hp, Evinrude 50 hp, Evinrude 60 hp, Evinrude PL, Evinrude RL, Evinrude SL, Evinrude TL |
| Model Year | 2011 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)