100
UNDERSTANDING THE FEATURES OF YOUR VEHICLE
NOTE: If the driver’s door is left open, and the head -
lights or parking lights are left on, the “High Beam
Ind icator Light” will flash and a chim e will sou nd .
Front Fog Lights — If Equipped
The front fog light switch is in the multi-function
control lever. To activate the front fog lights, turn
on the parking or low beam head lights and pull
out the end of the lever.
Lights-On Reminder
If the head lights or parking lights are on after the ignition
is turned off, a chim e will sou nd when the driver’s door
is opened .
NOTE: The fog lights will only operate with the parking
lights or the head lights on low beam . Selecting high
beam head lights will turn off the fog lights.
Headlight Dimmer Switch
Push the multi-function control lever away from you to
switch the head lights to high beam . Pull the lever to-
ward s you to switch the head lights back to low beam .
Turn Signals
Move the multi-function control lever up or down and
the arrow s on each side of the instru ment cluster flash to
show prop er operation of the front and rear turn signal
lights. You can signal a lane change by moving the lever
partially up or down withou t moving beyond the detent.
Passing Light
You can signal another vehicle with you r head lights by
lightly pulling the multi-function control lever tow ard
the steering wheel. This will cause the head lights to turn
on at high beam and rem ain on until the lever is released .
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)