STARTING AND OPERATING
283
The “4WD Ind icator Light” (located in the instru ment
cluster) will illuminate when the transfer case is shifted
into the 4H position.
Shifting Procedure
2H to 4H or 4H to 2H
Shifting betw een 2H and 4H can be made with the
vehicle stop ped or in motion. If the vehicle is in motion,
shifts can be made up to 50 mph (80 km/ h). With the
vehicle in motion, the transfer case will engage/
disengage faster if you momentarily release the accelera-
tor pedal after completing the shift. Apply a constant
force when shifting the transfer case lever.
N (Neutral) Position
Neutral — Disengages both the front and rear driveshafts
from the powertrain. To be used for flat tow ing behind
another vehicle. Refer to “Recreational Towing” in Sec-
tion 5 of this manu al.
5
4L Position
Four Wheel Drive Low Range — Locks the front and rear
driveshafts together. Forces the front and rear wheels to
rotate at the sam e speed . Additional traction and maxi-
mum pulling power for loose, slippery road surfaces
only. Do not exceed 25 mph (40 km/ h).
4H to 4L or 4L to 4H
With the vehicle rolling at 2 to 3 mph (3 to 5 km/ h), shift
an autom atic transm ission to N (Neutral) or depress the
clutch pedal on a manu al transm ission. While the vehicle
is coasting at 2 to 3 mph (3 to 5 km/ h), shift the transfer
case lever firm ly to the desired position. Do not pause in
transfer case N (Neutral).
The “4WD Ind icator Light” (located in the instru ment
cluster) will illuminate when the transfer case is shifted
into the 4L position.
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)