MAINTAINING YOUR VEHICLE
409
BULB REPLACEMENT
Head Light
9. Push connector locking tab to the unlock position.
10. Remove connector from bulb.
1.
Open hood and support using prop rod .
11. Push connector onto new bulb base, and push the
connector locking tab to the lock position.
2.
Remove the front grille. Turn the retainers along the
top 1/ 4 turn counter-clockw ise and rem ove.
Pull the bottom of the grille away starting at one side
and working tow ard the other.
Turn both park and turn signal socket assem blies 1/ 4
turn counter-clockw ise and rem ove.
Remove the four screw s hold ing the metal retaining
CAUTIO N!
3.
Do not tou ch the new bulb with you r fin gers. Oil
contam ination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcoh ol.
4.
5.
7
ring.
12.
Reinstall bulb hou sing. Rotate the bulb 1/ 4 turn
6.
7.
8.
Remove the lamp from the collar.
clockw ise.
Grasp the bulb and turn 1/ 4 turn counter-clockw ise.
Pull the bulb from the hou sing.
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2007 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)