THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
65
extractedfromtheretractor.Allowthebelttoreturnto
theretractor,pullingontheexcesswebbingtotighten
thelapportionaboutthechildrestraint.Foradditional
information, refer to ЉAutomatic Locking ModeЉ ear-
lierinthissection.
• Bucklemanufacturer’sthe childinstructionsinto thetellrestraintyou. exactly as the
•
Whenvehicleyourwithchildtheseatrestraintbeltorisremovenotinuse,itfromsecuretheitvehicle.inthe 2
Donotleaveitlooseinthevehicle.Inasuddenstopor
collision,itcouldstriketheoccupantsorseatbacksand
causeseriouspersonalinjury.
•
•
Intherearseat,youmayhavetroubletighteningthe
lap/shoulder belt on the child restraint because the
buckle or latch plate is too close to the belt path
opening on the restraint. Disconnect the latch plate
from the buckle and twist the short buckle-end belt
several times to shorten it. Insert the latch plate into
thebucklewiththereleasebuttonfacingout.
NOTE:
For
additional
information
refer
to
www.seatcheck.orgorcall1-866-SEATCHECK.
OlderChildrenandChildRestraints
Childrenwhoweighmorethan20lbs(9kg)andwhoare
older than one year can ride forward-facing in the
vehicle.Forward-facingchildseatsandconvertiblechild
seats used in the forward-facing direction, are for chil-
dren who weigh 20 to 40 lbs (9 to 18 kg), and who are
olderthanoneyear.Thesechildseatsarealsoheldinthe
If the belt still cannot be tightened, or if pulling and
pushing on the restraint loosens the belt, disconnect
the latch plate from the buckle, turn the buckle
around, and insert the latch plate into the buckle
again. If you still cannot make the child restraint
secure,tryadifferentseatingposition.
| Categories | Jeep Manuals, Jeep Wrangler Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)