48
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Enhanced Seat Belt Use Reminder System
(BeltAlert)
BeltAlert Program ming
The Enhanced Warning System (BeltAlert) can be en-
abled or disabled by you r authorized dealer or by
perform ing the follow ing step s:
If the driver’s or front passenger’s seat belt has not been
buckled within 60 second s of starting the vehicle, and if
the vehicle speed is greater than 5 mph (8 km/ h), the
Enhanced Warning System (BeltAlert) will alert the
driver or front passenger to buckle their seat belt. The
driver shou ld also instru ct all other occupants to buckle
their seat belts. Once the warning is triggered , the
Enhanced Warning System (BeltAlert) will continu e to
chim e and flash the Seat Belt Remind er Light for 96
second s or until the driver’s or front passenger’s seat belt
is buckled . The Enhanced Warning System (BeltAlert)
will be reactivated if the driver’s or front passenger’s seat
belt is unbu ckled for more than 10 second s and the
vehicle speed is greater than 5 mph (8 km/ h).
NOTE: Daim lerChrysler does not recom mend deacti-
vating the Enhanced Warning System (BeltAlert).
1. With all doors closed , and the ignition switch in any
position excep t ON or START, buckle the driver’s seat
belt.
2.
Turn the ignition switch to the ON position, but do not
start the engine. Wait for the Seat Belt Remind er Light to
turn off and then proceed to the next step .
NOTE: You must perform the follow ing step s within 60
second s of turning the ignition switch to the ON position.
| Categories | Jeep Liberty Manuals, Jeep Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)