160
STARTING AND OPERATING
Autostick Operation
autom atically; shifting betw een the four available gears.
When you wish to engage autostick, simply move the
autostick lever to the AUTOSTICK position. The trans-
axle will rem ain in the current gear until an upshift or
downshift is chosen.
The Autostick position is just below the Overd rive posi-
tion and is identified by the word “AUTOSTICK”. When
you place the shift lever in the Autostick position, it can
be moved from side to side. Moving the lever to the left
(-)
The gear position will be show n in the transm ission gear
display.
triggers a downshift and to the right (+) an upshift.
Move the lever back to the Overd rive position to shift out
of the Autostick mode.
Autostick General Information
•
•
•
The transaxle will autom atically upshift from first to
second gear and from second to third gear when
engine speed reaches abou t 6300 RPM.
Dow nshifts from third to second gear above 66 mph
(106
km/ h) and from second to first gear above 37
mph (60 km/ h) will be ignored .
You can start out in first, second , or third gear. Shifting
into fourth gear can occur only after vehicle speed
reaches 15 mph (24 km/ h).
You can shift in or out of the autostick mode at any time
withou t taking you r foot off the accelerator pedal. If you
choose the Overd rive mode, the transaxle will operate
• Thegear transaxlewhen comwingill toauatomstopatically. downshift to first
| Categories | Chrysler Manuals, Chrysler Sebring Manuals |
|---|---|
| Model Year | 2004 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)