UNDERSTANDING YOUR INSTRUMENT PANEL
263
The system will autom atically control recircu -
lation. However, pressing this button will tem -
porarily put the system in recircu lation mode.
This can be used when outsid e cond itions such
as smoke, odors, dust, or high hu midity are present. This
will cause the LED to illuminate.
• off)Undtheer certainclimatecondcontrolitionssystem(after mtheay vehiclerecalibrateis tuandrneda
noise may be heard for 20 second s. This is part of
norm al operation.
•
Most of the time, when in Autom atic operation, you
can tem porarily put the system into recircu lation
mode by pressing the Recirc button. However, und er 4
certain cond itions in autom atic the system is blow ing
air out of the defrost vents. When these cond itions are
present and the Recirc button is pressed the ind icator
will flash and rem ain off. This tells you that you are
unable to go into recircu lation mode at this time. If you
would like to go to Recircu lation mode, you must first
move you r mode knob to panel, panel/ floor or floor,
then hit the Recirc button. This featu re will red uce the
possibility of wind ow fogging.
NOTE:
•
The surface of the climate control panel, and the top
center of the instru ment panel shou ld be kep t free of
debris due to the climate control sensor’s location.
Mud on the wind shield may also cause poor operation
of this system .
•
To provid e you with maxim um comfort in the auto-
matic mode, during cold start-u ps the blow er fan will
rem ain off until the engine warm s up. However, the
fan will engage immediately if the defrost mode is
selected or if you manu ally select a blow er speed .
| Categories | Jeep Grand Cherokee Manuals, Jeep Manuals |
|---|---|
| Model Year | 2008 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)